Availability: | |
---|---|
Quantity: | |
PP-GF60-0403 P10/10-XH
Forever
PP-GF60-0403 P10/10-XH Polypropylene with 60% ash content is reinforced with long glass fibers bonded to the polypropylene matrix. The pellets are cylindrical and contain embedded 10 mm long fibers. CELSTRAN-produced parts exhibit exceptional mechanical properties, including high strength, stiffness, and resistance to high temperatures. The presence of the fiber skeleton enhances the notched impact strength at both high and low temperatures. The long fiber reinforcement reduces deformation under stress. The molded parts have a uniform shrinkage to minimize warping. Complex parts can be consistently manufactured using injection molding. The material is commonly used for functional and structural components in automotive applications.
General | ||
Form Resin Pellets | ||
Filler 60 % Long Glass Fiber | ||
Feature | Low Warpage Creep Resistance Low Temperature Impact Chemically Coupled | Good Hardness Good Dimensional |
Uses Automotive | ||
Physical Nominal Value | Test Method | |
Density / Specific Gravity 1.43 g/cm³ | ISO 1183 | |
Mechanical Nominal Value | Test Method | |
Tensile Modulus 15000 MPa | ISO 527-2/1A | |
Tensile Stress, Break 145 MPa | ISO 527-2/1A/5 | |
Tensile Strain, Break 1.5 % | ISO 527-2/1A/5 | |
Flexural Modulus | ISO 178 | |
23 °C 16000 MPa | ||
80 °C 11000 MPa | ||
Flexural Stress | ISO 178 | |
23 °C 240 MPa | ||
80 °C 136 MPa | ||
C harpy Notched Impact Strength | ISO 179 1eA | |
-30 °C 38 kJ/m² | ||
23 °C 33 kJ/m² | ||
C harpy Unnotched Impact Strength | ISO 179 1eU | |
-30 °C 70 kJ/m² | ||
23 °C 68 kJ/m² |
Thermal | Nominal Value | Test Method |
Heat Deflection Temperature, Unannealed(1.8 MPa) | 160 °C | ISO 75-2/A |
Melting Point(10 °C/min) | 168 °C | ISO 11357-3 |
Flame Rating(1 mm) | HB | UL 94 |
Processing | Nominal Value | |
Drying Temperature<Injection> | 90 - 100 °C | |
Drying Time<Injection> | 4.0 hr | |
Suggested Max Moisture<Injection> | 0.20 % | |
Rear Temperature<Injection> | 220 - 230 °C | |
Middle Temperature<injection> | 230 - 240 °C | |
Front Temperature<Injection> | 240 - 250 °C | |
Nozzle Temperature<Injection> | 240 - 250 °C | |
Processing Temp, Melt<Injection> | 230 - 270 °C | |
Mold Temperature<Injection> | 30 - 70 °C | |
Injection Rate<Injection> | Slow | |
Back Pressure<Injection> | < 3.00 MPa | |
Feeding Zone Temperature<Injection> | 20 - 50 °C | |
Zone4 temperature<Injection> | 240 - 250 °C | |
Hot Runner Temperature<Injection> | 230 - 270 °C |
PP-GF60-0403 P10/10-XH Polypropylene with 60% ash content is reinforced with long glass fibers bonded to the polypropylene matrix. The pellets are cylindrical and contain embedded 10 mm long fibers. CELSTRAN-produced parts exhibit exceptional mechanical properties, including high strength, stiffness, and resistance to high temperatures. The presence of the fiber skeleton enhances the notched impact strength at both high and low temperatures. The long fiber reinforcement reduces deformation under stress. The molded parts have a uniform shrinkage to minimize warping. Complex parts can be consistently manufactured using injection molding. The material is commonly used for functional and structural components in automotive applications.
General | ||
Form Resin Pellets | ||
Filler 60 % Long Glass Fiber | ||
Feature | Low Warpage Creep Resistance Low Temperature Impact Chemically Coupled | Good Hardness Good Dimensional |
Uses Automotive | ||
Physical Nominal Value | Test Method | |
Density / Specific Gravity 1.43 g/cm³ | ISO 1183 | |
Mechanical Nominal Value | Test Method | |
Tensile Modulus 15000 MPa | ISO 527-2/1A | |
Tensile Stress, Break 145 MPa | ISO 527-2/1A/5 | |
Tensile Strain, Break 1.5 % | ISO 527-2/1A/5 | |
Flexural Modulus | ISO 178 | |
23 °C 16000 MPa | ||
80 °C 11000 MPa | ||
Flexural Stress | ISO 178 | |
23 °C 240 MPa | ||
80 °C 136 MPa | ||
C harpy Notched Impact Strength | ISO 179 1eA | |
-30 °C 38 kJ/m² | ||
23 °C 33 kJ/m² | ||
C harpy Unnotched Impact Strength | ISO 179 1eU | |
-30 °C 70 kJ/m² | ||
23 °C 68 kJ/m² |
Thermal | Nominal Value | Test Method |
Heat Deflection Temperature, Unannealed(1.8 MPa) | 160 °C | ISO 75-2/A |
Melting Point(10 °C/min) | 168 °C | ISO 11357-3 |
Flame Rating(1 mm) | HB | UL 94 |
Processing | Nominal Value | |
Drying Temperature<Injection> | 90 - 100 °C | |
Drying Time<Injection> | 4.0 hr | |
Suggested Max Moisture<Injection> | 0.20 % | |
Rear Temperature<Injection> | 220 - 230 °C | |
Middle Temperature<injection> | 230 - 240 °C | |
Front Temperature<Injection> | 240 - 250 °C | |
Nozzle Temperature<Injection> | 240 - 250 °C | |
Processing Temp, Melt<Injection> | 230 - 270 °C | |
Mold Temperature<Injection> | 30 - 70 °C | |
Injection Rate<Injection> | Slow | |
Back Pressure<Injection> | < 3.00 MPa | |
Feeding Zone Temperature<Injection> | 20 - 50 °C | |
Zone4 temperature<Injection> | 240 - 250 °C | |
Hot Runner Temperature<Injection> | 230 - 270 °C |