Availability: | |
---|---|
Quantity: | |
PP-GF30-05CN01/10-XH
Forever
PP Polypropylene reinforced with 30 weight percent ash content and long glass fibers. This impact modified copolymer has chemically coupled fibers to the polypropylene matrix. The pellets are cylindrical and the embedded fibers are typically 10 mm long. CELSTRAN parts exhibit exceptional mechanical properties, including high strength, stiffness, and heat deflection. The presence of the fiber skeleton enhances the notched impact strength at both high and low temperatures. The long fiber reinforcement significantly reduces creep, while the molded parts demonstrate very isotropic shrinkage, minimizing warpage. With high reproducibility in injection molding, it is widely used in the automotive industry for functional and structural parts.
General | ||
Form Resin Pellets | ||
Filler 30 % Long Glass Fiber | ||
Features Low Warpage | Creep Resistance | Good Hardness |
Good Dimensional | ||
Usage Automotive | ||
Physical | Nominal Value | Test Method |
Density / Specific Gravity | 1.13 g/cm³ | ISO 1183 |
Mechanical | Nominal Value | Test Method |
Tensile Modulus | 6000 MPa | ISO 527-2/1A |
Tensile Stress, Break | 95.0 MPa | ISO 527-2/1A/5 |
Tensile Strain, Break | 2.4 % | ISO 527-2/1A/5 |
Flexural Modulus | ISO 178 | |
23 °C | 6000 MPa | |
80 °C | 4000 MPa | |
Flexural Stress | ISO 178 | |
23 °C | 150 MPa | |
80 °C | 70.0 MPa | |
C harpy Notched Impact Strength | ISO 179 1eA | |
-30 °C | 24 kJ/m² | |
23 °C | 25 kJ/m² | |
C harpy Unnotched Impact Strength | ISO 179 1eU | |
-30 °C | 70 kJ/m² | |
23 °C | 60 kJ/m² |
Thermal | Nominal Value | Test Method |
Heat Deflection Temperature, Unannealed | ||
1.8 MPa | 156 °C | ISO 75-2/A |
8 MPa | 124 °C | ISO 75-2/C |
Melting Point(10 °C/min) | 166 °C | ISO 11357-3 |
Flame Rating(1 mm) | HB | UL 94 |
Processing | Nominal Value | |
Drying Temperature<Injection> | 90 - 100 °C | |
Drying Time<Injection> | 4.0 hr | |
Suggested Max Moisture<Injection> | 0.20 % | |
Rear Temperature<Injection> | 210 - 230 °C | |
Middle Temperature<injection> | 230 - 240 °C | |
Front Temperature<Injection> | 240 - 250 °C | |
Nozzle Temperature<Injection> | 240 - 250 °C | |
Processing Temp, Melt<Injection> | 210 - 270 °C | |
Mold Temperature<Injection> | 30 - 70 °C | |
Injection Rate<Injection> | Slow | |
Back Pressure<Injection> | < 3.00 MPa | |
Feeding Zone Temperature<Injection> | 20 - 50 °C | |
Zone4 temperature<Injection> | 250 °C | |
Hot Runner Temperature<Injection> | 210 - 270 °C |
PP Polypropylene reinforced with 30 weight percent ash content and long glass fibers. This impact modified copolymer has chemically coupled fibers to the polypropylene matrix. The pellets are cylindrical and the embedded fibers are typically 10 mm long. CELSTRAN parts exhibit exceptional mechanical properties, including high strength, stiffness, and heat deflection. The presence of the fiber skeleton enhances the notched impact strength at both high and low temperatures. The long fiber reinforcement significantly reduces creep, while the molded parts demonstrate very isotropic shrinkage, minimizing warpage. With high reproducibility in injection molding, it is widely used in the automotive industry for functional and structural parts.
General | ||
Form Resin Pellets | ||
Filler 30 % Long Glass Fiber | ||
Features Low Warpage | Creep Resistance | Good Hardness |
Good Dimensional | ||
Usage Automotive | ||
Physical | Nominal Value | Test Method |
Density / Specific Gravity | 1.13 g/cm³ | ISO 1183 |
Mechanical | Nominal Value | Test Method |
Tensile Modulus | 6000 MPa | ISO 527-2/1A |
Tensile Stress, Break | 95.0 MPa | ISO 527-2/1A/5 |
Tensile Strain, Break | 2.4 % | ISO 527-2/1A/5 |
Flexural Modulus | ISO 178 | |
23 °C | 6000 MPa | |
80 °C | 4000 MPa | |
Flexural Stress | ISO 178 | |
23 °C | 150 MPa | |
80 °C | 70.0 MPa | |
C harpy Notched Impact Strength | ISO 179 1eA | |
-30 °C | 24 kJ/m² | |
23 °C | 25 kJ/m² | |
C harpy Unnotched Impact Strength | ISO 179 1eU | |
-30 °C | 70 kJ/m² | |
23 °C | 60 kJ/m² |
Thermal | Nominal Value | Test Method |
Heat Deflection Temperature, Unannealed | ||
1.8 MPa | 156 °C | ISO 75-2/A |
8 MPa | 124 °C | ISO 75-2/C |
Melting Point(10 °C/min) | 166 °C | ISO 11357-3 |
Flame Rating(1 mm) | HB | UL 94 |
Processing | Nominal Value | |
Drying Temperature<Injection> | 90 - 100 °C | |
Drying Time<Injection> | 4.0 hr | |
Suggested Max Moisture<Injection> | 0.20 % | |
Rear Temperature<Injection> | 210 - 230 °C | |
Middle Temperature<injection> | 230 - 240 °C | |
Front Temperature<Injection> | 240 - 250 °C | |
Nozzle Temperature<Injection> | 240 - 250 °C | |
Processing Temp, Melt<Injection> | 210 - 270 °C | |
Mold Temperature<Injection> | 30 - 70 °C | |
Injection Rate<Injection> | Slow | |
Back Pressure<Injection> | < 3.00 MPa | |
Feeding Zone Temperature<Injection> | 20 - 50 °C | |
Zone4 temperature<Injection> | 250 °C | |
Hot Runner Temperature<Injection> | 210 - 270 °C |