Availability: | |
---|---|
Quantity: | |
LUX2180T-XH
FOREVER
3909109000
1 What features of polycarbonate pc granules are considered for your plastics raw materials choosing?
① Mechanical properties: High strength, stable size, small creep (very little change under high temperature conditions), its tensile and bending strength are similar to polyoxymethylene and polyamide.
② Its impact strength is the highest among all engineering plastics, higher than polyoxymethylene, almost 3 to 5 times that of polyamide, and similar to phenolic resin and polyester resin reinforced with glass fiber.
③Heat aging resistance: The enhanced UL temperature index reaches 120~140°C (the outdoor long-term aging resistance is also very good), which is higher than that of polyoxymethylene, but only lower than that of polysulfone and polyphenylene ether.
④The transparency is very good, the light transmittance of the film can reach 89%, second only to organic glass, and it can also be colored.
⑤ oil resistance is very good, the sample is soaked in gasoline for three months, the weight basically does not change.
⑥ Molding processability: PC can be injection molded, extruded, molded, blow molded, thermoformed, printed, bonded, coated and machined, and the most important processing method is injection molding.
1 What features of polycarbonate pc granules are considered for your plastics raw materials choosing?
① Mechanical properties: High strength, stable size, small creep (very little change under high temperature conditions), its tensile and bending strength are similar to polyoxymethylene and polyamide.
② Its impact strength is the highest among all engineering plastics, higher than polyoxymethylene, almost 3 to 5 times that of polyamide, and similar to phenolic resin and polyester resin reinforced with glass fiber.
③Heat aging resistance: The enhanced UL temperature index reaches 120~140°C (the outdoor long-term aging resistance is also very good), which is higher than that of polyoxymethylene, but only lower than that of polysulfone and polyphenylene ether.
④The transparency is very good, the light transmittance of the film can reach 89%, second only to organic glass, and it can also be colored.
⑤ oil resistance is very good, the sample is soaked in gasoline for three months, the weight basically does not change.
⑥ Molding processability: PC can be injection molded, extruded, molded, blow molded, thermoformed, printed, bonded, coated and machined, and the most important processing method is injection molding.