Availability: | |
---|---|
Quantity: | |
TR 90 NZ-XH
Forever
TR 90 NZ-XH, follows ISO 1874 standards. It can be processed through injection molding or other extrusion methods, and it is available in the form of granules. The material contains lubricants as additives. It is known for its high impact resistance, improved UV resistance for outdoor use, and transparency. This product is regionally available in North America, Europe, Asia Pacific, South and Central America, and the Near East/Africa. It is resistant to hydrolysis and classified as a Co Polyamide, with transparency as one of its attributes. It is suitable for various applications including automotive (compressed air systems, fuel systems, interior, exterior), electricals & electronics (electrical appliances, equipment, connectors, energy distribution, lighting, mobile phones, and portable devices), industry & consumer goods (housewares, hydraulics & pneumatics, mechanical engineering, med.
General | ||||
Form | Resin Pellets | |||
Feature | Outdoor Hydrolysis Resistance | Clear/Transparent High Impact | ||
Uses | Automotive Industria | Optical Applications
Electrical | Consumer | |
Physical | Nominal Value | Test Method | ||
Dry: Water Absorption | 3 % | |||
Dry: Humidity absorption | 1.5 % | |||
Density, dry | 1 g/cm³ | ISO 1183 | ||
Dry: Mold Shrinkage, Flow | 0.9 % | ISO294-4;ISO2577 | ||
Dry: Mold Shrinkage, Transverse | 0.9 % | ISO294-4;ISO2577 | ||
Mechanical | Nominal Value | Test Method | ||
Condition: Tensile Modulus | 1300 MPa | ISO 527-1/-2 | ||
Condition: Yield stress | 50 MPa | ISO 527-1/-2 | ||
Condition: Yield strain | 7 % | ISO 527-1/-2 | ||
Condition: Stress at break | 45 MPa | ISO 527-1/-2 | ||
Condition: Strain at break | > 50 % | ISO 527-1/-2 | ||
Condition: Charpy Impact Strength | ISO 179 1eU | |||
23 °C | N kJ/m² | |||
-30 °C | N kJ/m² | |||
Conditioned: Charpy Impact Strength, Notched | ISO 179 1eA | |||
23 °C | 22 kJ/m² | |||
-30 °C | 15 kJ/m² | |||
Condition: Ball Indentation Hardness | 90 MPa | ISO 2039-1 |
Thermal | Nominal Value | Test Method |
Dry: Glass Transition Temperature(10 °C/min) | 155 °C | ISO 11357-1/-2 |
Dry: Temp. of deflection under load 1.8 MPa 0.45 MPa |
110 °C 135 °C | ISO 75-1/-2 |
Dry: Coeff. of linear therm. expansion, parallel | 9E-5 /K | ISO 11359-1/-2 |
Dry: Coeff. of linear therm. expansion, normal | 9E-5 /K | ISO 11359-1/-2 |
Maximum usage temperature long term | 80 - 100 °C | ISO 2578 |
Maximum usage temperature short term | 120 °C | |
Electrical | Nominal Value | Test Method |
Condition: Volume resistivity | 1E+9 ohms ·cm | IEC 60093 |
Condition: Surface resistivity | 1E+12 Ohms | IEC 60093 |
Condition: Electric Strength | 34 kV/mm | IEC 60243-1 |
Condition: Comparative Tracking Index | 600 | IEC 60112 |
TR 90 NZ-XH, follows ISO 1874 standards. It can be processed through injection molding or other extrusion methods, and it is available in the form of granules. The material contains lubricants as additives. It is known for its high impact resistance, improved UV resistance for outdoor use, and transparency. This product is regionally available in North America, Europe, Asia Pacific, South and Central America, and the Near East/Africa. It is resistant to hydrolysis and classified as a Co Polyamide, with transparency as one of its attributes. It is suitable for various applications including automotive (compressed air systems, fuel systems, interior, exterior), electricals & electronics (electrical appliances, equipment, connectors, energy distribution, lighting, mobile phones, and portable devices), industry & consumer goods (housewares, hydraulics & pneumatics, mechanical engineering, med.
General | ||||
Form | Resin Pellets | |||
Feature | Outdoor Hydrolysis Resistance | Clear/Transparent High Impact | ||
Uses | Automotive Industria | Optical Applications
Electrical | Consumer | |
Physical | Nominal Value | Test Method | ||
Dry: Water Absorption | 3 % | |||
Dry: Humidity absorption | 1.5 % | |||
Density, dry | 1 g/cm³ | ISO 1183 | ||
Dry: Mold Shrinkage, Flow | 0.9 % | ISO294-4;ISO2577 | ||
Dry: Mold Shrinkage, Transverse | 0.9 % | ISO294-4;ISO2577 | ||
Mechanical | Nominal Value | Test Method | ||
Condition: Tensile Modulus | 1300 MPa | ISO 527-1/-2 | ||
Condition: Yield stress | 50 MPa | ISO 527-1/-2 | ||
Condition: Yield strain | 7 % | ISO 527-1/-2 | ||
Condition: Stress at break | 45 MPa | ISO 527-1/-2 | ||
Condition: Strain at break | > 50 % | ISO 527-1/-2 | ||
Condition: Charpy Impact Strength | ISO 179 1eU | |||
23 °C | N kJ/m² | |||
-30 °C | N kJ/m² | |||
Conditioned: Charpy Impact Strength, Notched | ISO 179 1eA | |||
23 °C | 22 kJ/m² | |||
-30 °C | 15 kJ/m² | |||
Condition: Ball Indentation Hardness | 90 MPa | ISO 2039-1 |
Thermal | Nominal Value | Test Method |
Dry: Glass Transition Temperature(10 °C/min) | 155 °C | ISO 11357-1/-2 |
Dry: Temp. of deflection under load 1.8 MPa 0.45 MPa |
110 °C 135 °C | ISO 75-1/-2 |
Dry: Coeff. of linear therm. expansion, parallel | 9E-5 /K | ISO 11359-1/-2 |
Dry: Coeff. of linear therm. expansion, normal | 9E-5 /K | ISO 11359-1/-2 |
Maximum usage temperature long term | 80 - 100 °C | ISO 2578 |
Maximum usage temperature short term | 120 °C | |
Electrical | Nominal Value | Test Method |
Condition: Volume resistivity | 1E+9 ohms ·cm | IEC 60093 |
Condition: Surface resistivity | 1E+12 Ohms | IEC 60093 |
Condition: Electric Strength | 34 kV/mm | IEC 60243-1 |
Condition: Comparative Tracking Index | 600 | IEC 60112 |