Availability: | |
---|---|
Quantity: | |
EXL1418TAML-XH
FOREVER
EXL1418TAML-XH is the ultimate solution for manufacturers looking for a high-performance polycarbonate resin with added antimicrobial properties.
With its medium flow and transparent injection molding (IM) grade, this resin is the perfect choice for creating products that require both clarity and durability.
Whether you need a transparent or tinted color, EXL1418TAML-XH is available in both options.
Featuring a unique PC siloxane copolymer, this resin offers exceptional processability, release, and shorter IM cycle times compared to standard PC. The added antimicrobial properties make this resin ideal for creating products that require constant hygiene maintenance such as medical devices, food equipment, and household appliances.
In addition, EXL1418TAML-XH also offers room temperature ductility, ensuring that your products remain durable and long-lasting even under tough conditions. With its unbeatable combination of performance and functionality, this resin is the perfect choice for manufacturers looking to create high-quality products that last.
General | |||
Form | Resin Pellets | ||
Feature Fungus Resistance High Impact Low Temperature Impact | |||
Appliances | Lighting Applications | Automotive Under The | |
Hood | |||
Electronic Displays | Lawn And Garden | Aerospace | |
Uses | Equipment | Constraction | |
Electrical Engineering | Medical Device | Outdoor | |
Electrical | Personal Care | Military/Defense Applications | |
Physical | Nominal Value | Test Method | |
Density / Specific Gravity | 1.18 g/cm³ | ASTM D792;ISO 1183 | |
Melt Mass-Flow Rate, MFR(300 °C;1.2 kg) | 9.0 g/10min | ASTM D1238 | |
Melt Volume-Flow Rate, MVR(300 °C;1.2 kg) | 8.7 cm³/10 min | ISO 1133 | |
Molding Shrinkage, Across Flow(3.2 mm) | 0.40 - 0.80 % | Internal Method | |
Molding Shrinkage, Flow(3.2 mm) | 0.40 - 0.80 % | Internal Method | |
Water Absorption, Saturation(23 °C) | 0.12 % | ISO 62 | |
Water Absorption, Equilibrium(50% RH;23 °C) | 0.090 % | ISO 62 | |
Mechanical | Nominal Value | Test Method | |
Tensile Modulus 50 mm/min |
2070 MPa 2040 MPa |
ASTM D638 ISO 527-1/1 | |
Tensile Strength, Yield 50 mm/min;Type I |
54.0 MPa 54.0 MPa |
ASTM D638 ISO 527-2/50 | |
Tensile Strength, Break 50 mm/min;Type I |
57.0 MPa 51.0 MPa |
ASTM D638 ISO 527-2/50 |
Tensile Elongation, Yield 50 mm/min;Type I |
5.0 % 5.6 % |
ASTM D638 ISO 527-2/50 |
Tensile Elongation, Break 50 mm/min;Type I |
100 % 86 % |
ASTM D638 ISO 527-2/50 |
Flexural Modulus 1.3 mm/min;50 mm;Span 2 mm/min |
2080 MPa 2170 MPa |
ASTM D790 ISO 178 |
Flexural Strength 1.3 mm/min;50 mm;Span 2 mm/min |
84.0 MPa 75.0 MPa |
ASTM D790 ISO 178 |
Charpy Notched Impact Strength -30 °C;80 23 °C;80 |
13 kJ/m² 38 kJ/m² | ISO 179/1eA |
Charpy Unnotched Impact Strength -30 °C;80 23 °C;80 |
No Break No Break | ISO 179/1eU |
Notched Izod Impact -30 °C 23 °C -30 °C;80*10*3 mm 23 °C;80*10*3 mm |
140 J/m 530 J/m 14 kJ/m² 41 kJ/m² |
ASTM D256 ASTM D256 ISO 180/1A ISO 180/1A |
Unnotched Izod Impact Strength -30 °C;80*10*3 mm 23 °C;80*10*3 mm |
No Break No Break | ISO 180/1U |
Instrumented Dart Impact, Total Energy(23 °C) | 70.0 J | ASTM D3763 |
Thermal | Nominal Value | Test Method |
Deflection Temperature Under Load, Unannealed 1.8 MPa;3.2 mm 1.8 MPa;120*10*4 mm;4 mm;100 mm;Span |
119 °C 118 °C |
ASTM D648 ISO 75-2/Ae |
Vicat Softening Temperature(50 °C/h;50 N;Rate A;Loading 2) | 143 °C | ISO 306/B50;ASTM D1525;ISO 306/B120 |
Ball Pressure Test(123 - 127 °C) | Pass | IEC 60695-10-2 |
CLTE, Flow -40 - 40 °C 23 - 80 °C |
6.7E-5 cm/cm/°C 6.7E-5 cm/cm/°C |
ASTM E831 ISO 11359-2 |
CLTE, Transverse -40 - 40 °C 23 - 80 °C |
8.0E-5 cm/cm/°C 8.0E-5 cm/cm/°C |
ASTM E831 ISO 11359-2 |
Optical | Nominal Value | Test Method |
Transmittance (2.5e+3 µm) | 89.8 % | ASTM D1003 |
Haze(2.5e+3 µm) | 11.0 % | ASTM D1003 |
Processing | Nominal Value | |
Drying Temperature<Injection> | 120 °C | |
Drying Time<Injection> | 3.0 - 4.0 hr | |
Suggested Max Moisture<Injection> | 0.020 % | |
Rear Temperature<Injection> | 270 - 295 °C | |
Middle Temperature<injection> | 280 - 305 °C | |
Front Temperature<Injection> | 295 - 315 °C | |
Nozzle Temperature<Injection> | 290 - 310 °C | |
Processing Temp, Melt<Injection> | 295 - 315 °C | |
Mold Temperature<Injection> | 70 - 95 °C |
EXL1418TAML-XH is the ultimate solution for manufacturers looking for a high-performance polycarbonate resin with added antimicrobial properties.
With its medium flow and transparent injection molding (IM) grade, this resin is the perfect choice for creating products that require both clarity and durability.
Whether you need a transparent or tinted color, EXL1418TAML-XH is available in both options.
Featuring a unique PC siloxane copolymer, this resin offers exceptional processability, release, and shorter IM cycle times compared to standard PC. The added antimicrobial properties make this resin ideal for creating products that require constant hygiene maintenance such as medical devices, food equipment, and household appliances.
In addition, EXL1418TAML-XH also offers room temperature ductility, ensuring that your products remain durable and long-lasting even under tough conditions. With its unbeatable combination of performance and functionality, this resin is the perfect choice for manufacturers looking to create high-quality products that last.
General | |||
Form | Resin Pellets | ||
Feature Fungus Resistance High Impact Low Temperature Impact | |||
Appliances | Lighting Applications | Automotive Under The | |
Hood | |||
Electronic Displays | Lawn And Garden | Aerospace | |
Uses | Equipment | Constraction | |
Electrical Engineering | Medical Device | Outdoor | |
Electrical | Personal Care | Military/Defense Applications | |
Physical | Nominal Value | Test Method | |
Density / Specific Gravity | 1.18 g/cm³ | ASTM D792;ISO 1183 | |
Melt Mass-Flow Rate, MFR(300 °C;1.2 kg) | 9.0 g/10min | ASTM D1238 | |
Melt Volume-Flow Rate, MVR(300 °C;1.2 kg) | 8.7 cm³/10 min | ISO 1133 | |
Molding Shrinkage, Across Flow(3.2 mm) | 0.40 - 0.80 % | Internal Method | |
Molding Shrinkage, Flow(3.2 mm) | 0.40 - 0.80 % | Internal Method | |
Water Absorption, Saturation(23 °C) | 0.12 % | ISO 62 | |
Water Absorption, Equilibrium(50% RH;23 °C) | 0.090 % | ISO 62 | |
Mechanical | Nominal Value | Test Method | |
Tensile Modulus 50 mm/min |
2070 MPa 2040 MPa |
ASTM D638 ISO 527-1/1 | |
Tensile Strength, Yield 50 mm/min;Type I |
54.0 MPa 54.0 MPa |
ASTM D638 ISO 527-2/50 | |
Tensile Strength, Break 50 mm/min;Type I |
57.0 MPa 51.0 MPa |
ASTM D638 ISO 527-2/50 |
Tensile Elongation, Yield 50 mm/min;Type I |
5.0 % 5.6 % |
ASTM D638 ISO 527-2/50 |
Tensile Elongation, Break 50 mm/min;Type I |
100 % 86 % |
ASTM D638 ISO 527-2/50 |
Flexural Modulus 1.3 mm/min;50 mm;Span 2 mm/min |
2080 MPa 2170 MPa |
ASTM D790 ISO 178 |
Flexural Strength 1.3 mm/min;50 mm;Span 2 mm/min |
84.0 MPa 75.0 MPa |
ASTM D790 ISO 178 |
Charpy Notched Impact Strength -30 °C;80 23 °C;80 |
13 kJ/m² 38 kJ/m² | ISO 179/1eA |
Charpy Unnotched Impact Strength -30 °C;80 23 °C;80 |
No Break No Break | ISO 179/1eU |
Notched Izod Impact -30 °C 23 °C -30 °C;80*10*3 mm 23 °C;80*10*3 mm |
140 J/m 530 J/m 14 kJ/m² 41 kJ/m² |
ASTM D256 ASTM D256 ISO 180/1A ISO 180/1A |
Unnotched Izod Impact Strength -30 °C;80*10*3 mm 23 °C;80*10*3 mm |
No Break No Break | ISO 180/1U |
Instrumented Dart Impact, Total Energy(23 °C) | 70.0 J | ASTM D3763 |
Thermal | Nominal Value | Test Method |
Deflection Temperature Under Load, Unannealed 1.8 MPa;3.2 mm 1.8 MPa;120*10*4 mm;4 mm;100 mm;Span |
119 °C 118 °C |
ASTM D648 ISO 75-2/Ae |
Vicat Softening Temperature(50 °C/h;50 N;Rate A;Loading 2) | 143 °C | ISO 306/B50;ASTM D1525;ISO 306/B120 |
Ball Pressure Test(123 - 127 °C) | Pass | IEC 60695-10-2 |
CLTE, Flow -40 - 40 °C 23 - 80 °C |
6.7E-5 cm/cm/°C 6.7E-5 cm/cm/°C |
ASTM E831 ISO 11359-2 |
CLTE, Transverse -40 - 40 °C 23 - 80 °C |
8.0E-5 cm/cm/°C 8.0E-5 cm/cm/°C |
ASTM E831 ISO 11359-2 |
Optical | Nominal Value | Test Method |
Transmittance (2.5e+3 µm) | 89.8 % | ASTM D1003 |
Haze(2.5e+3 µm) | 11.0 % | ASTM D1003 |
Processing | Nominal Value | |
Drying Temperature<Injection> | 120 °C | |
Drying Time<Injection> | 3.0 - 4.0 hr | |
Suggested Max Moisture<Injection> | 0.020 % | |
Rear Temperature<Injection> | 270 - 295 °C | |
Middle Temperature<injection> | 280 - 305 °C | |
Front Temperature<Injection> | 295 - 315 °C | |
Nozzle Temperature<Injection> | 290 - 310 °C | |
Processing Temp, Melt<Injection> | 295 - 315 °C | |
Mold Temperature<Injection> | 70 - 95 °C |