Availability: | |
---|---|
Quantity: | |
PP226-XH
Forever
PP226-XH is a Polypropylene product. Characteristics include: Flame Rated Flame Retardant Impact Resistant
General | ||||
Form | Resin Pellets | |||
Feature | Medium Impact Resistance | |||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.10 g/cm³ | ASTM D792 | ||
Melt Mass-Flow Rate, MFR | 20 g/10min | ASTM D1238 | ||
Molding Shrinkage, Flow | 0.70 - 1.2 % | ASTM D955 | ||
Molding Shrinkage, Across Flow | 0.70 - 1.2 % | ASTM D955 | ||
Water Absorption, Saturation | 0.010 % | ASTM D570 | ||
Rockwell Hardness, M-Scale | 100 | ASTM D785 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Strength | 35.0 MPa | ASTM D638 | ||
Flexural Strength | 65.0 MPa | ASTM D790 | ||
Unnotched Izod Impact(23 °C) | 42 J/m | ASTM D256 | ||
Thermal | Nominal Value | Test Method | ||
Deflection Temperature Under Load, Unannealed(0.45 MPa) | 136 °C | ASTM D648 | ||
Flame Rating(1.5 mm) | V-0 | UL 94 | ||
Electrical | Nominal Value | Test Method | ||
Surface Resistivity | 1.0E+15 ohms | ASTM D257 |
PP226-XH is a Polypropylene product. Characteristics include: Flame Rated Flame Retardant Impact Resistant
General | ||||
Form | Resin Pellets | |||
Feature | Medium Impact Resistance | |||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.10 g/cm³ | ASTM D792 | ||
Melt Mass-Flow Rate, MFR | 20 g/10min | ASTM D1238 | ||
Molding Shrinkage, Flow | 0.70 - 1.2 % | ASTM D955 | ||
Molding Shrinkage, Across Flow | 0.70 - 1.2 % | ASTM D955 | ||
Water Absorption, Saturation | 0.010 % | ASTM D570 | ||
Rockwell Hardness, M-Scale | 100 | ASTM D785 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Strength | 35.0 MPa | ASTM D638 | ||
Flexural Strength | 65.0 MPa | ASTM D790 | ||
Unnotched Izod Impact(23 °C) | 42 J/m | ASTM D256 | ||
Thermal | Nominal Value | Test Method | ||
Deflection Temperature Under Load, Unannealed(0.45 MPa) | 136 °C | ASTM D648 | ||
Flame Rating(1.5 mm) | V-0 | UL 94 | ||
Electrical | Nominal Value | Test Method | ||
Surface Resistivity | 1.0E+15 ohms | ASTM D257 |