Availability: | |
---|---|
Quantity: | |
PP225HD-XH
Forever
The PP225HD-XH is a Polypropylene product. This particular product is known for its flame rating, flame retardant properties, and excellent dimensional stability.
General | ||||
Form | Resin Pellets | |||
Feature | Good Dimensional | |||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 0.998 g/cm³ | ASTM D792 | ||
Melt Mass-Flow Rate, MFR | 7.0 - 8.0 g/10min | ASTM D1238 | ||
Molding Shrinkage, Flow | 0.90 - 1.2 % | ASTM D955 | ||
Molding Shrinkage, Across Flow | 0.90 - 1.2 % | ASTM D955 | ||
Water Absorption, Saturation | 0.010 % | ASTM D570 | ||
Rockwell Hardness, M-Scale | 100 | ASTM D785 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Strength | 31.0 MPa | ASTM D638 | ||
Flexural Strength | 51.0 MPa | ASTM D790 | ||
Unnotched Izod Impact(23 °C) | 34 J/m | ASTM D256 | ||
Thermal | Nominal Value | Test Method | ||
Deflection Temperature Under Load, Unannealed(0.45 MPa) | 130 °C | ASTM D648 | ||
Flame Rating(1.5 mm) | V-2 | UL 94 | ||
Electrical | Nominal Value | Test Method | ||
Surface Resistivity | 1.0E+15 ohms | ASTM D257 |
The PP225HD-XH is a Polypropylene product. This particular product is known for its flame rating, flame retardant properties, and excellent dimensional stability.
General | ||||
Form | Resin Pellets | |||
Feature | Good Dimensional | |||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 0.998 g/cm³ | ASTM D792 | ||
Melt Mass-Flow Rate, MFR | 7.0 - 8.0 g/10min | ASTM D1238 | ||
Molding Shrinkage, Flow | 0.90 - 1.2 % | ASTM D955 | ||
Molding Shrinkage, Across Flow | 0.90 - 1.2 % | ASTM D955 | ||
Water Absorption, Saturation | 0.010 % | ASTM D570 | ||
Rockwell Hardness, M-Scale | 100 | ASTM D785 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Strength | 31.0 MPa | ASTM D638 | ||
Flexural Strength | 51.0 MPa | ASTM D790 | ||
Unnotched Izod Impact(23 °C) | 34 J/m | ASTM D256 | ||
Thermal | Nominal Value | Test Method | ||
Deflection Temperature Under Load, Unannealed(0.45 MPa) | 130 °C | ASTM D648 | ||
Flame Rating(1.5 mm) | V-2 | UL 94 | ||
Electrical | Nominal Value | Test Method | ||
Surface Resistivity | 1.0E+15 ohms | ASTM D257 |